Since spring 2019 an experimental setup consisting of an electron spectrometer and an ion time-of-flight mass spectrometer for diluted samples has been accessible for customers on the FinEstBeAMS beamline of the MAX IV Laboratory in Lund, Sweden. The setup permits customers to check the interplay of atoms, molecules, (molecular) microclusters and nanoparticles with short-wavelength (vacuum ultraviolet and X-ray) synchrotron radiation and to observe the electron and nuclear dynamics induced by this interplay.
Take a look at measurements of N2 and thiophene (C4H4S) molecules have demonstrated that the setup can be utilized for many-particle coincidence spectroscopy. The measurements of the Ar 3p photoelectron spectra by linear horizontal and vertical polarization present that angle-resolved experiments may also be carried out. The likelihood to match the electron spectroscopic outcomes of diluted samples with stable targets within the case of Co2O3 and Fe2O3 on the Co and Fe L2,3-absorption edges in the identical experimental session can be demonstrated. As a result of the photon vitality vary of the FinEstBeAMS beamline extends from 4.Four eV as much as 1000 eV, electron, ion and coincidence spectroscopy research could be executed in a really broad photon vitality vary.
First high-pressure XAFS outcomes on the bending-magnet-based energy-dispersive XAFS beamline BL-Eight on the Indus-2 synchrotron facility
The static focusing optics of the prevailing energy-dispersive XAFS beamline BL-Eight have been advantageously exploited to provoke diamond anvil cell primarily based high-pressure XANES experiments on the Indus-2 synchrotron facility, India. Within the framework of the restricted photon statistics with the two.5 GeV bending-magnet supply, restricted focusing optics and Four mm-thick diamond home windows of the pattern cell, a (non-trivial) beamline alignment technique for maximizing photon statistics on the pattern place has been designed.
Key methods embody the choice of a excessive X-ray vitality edge, the truncation of the smallest achievable focal spot measurement to focus on measurement with a slit and optimization of the horizontal slit place for transmission of the specified vitality band. A motor-scanning program for exact pattern centering has been developed. These particulars are introduced with rationalization for each step.
With these methods, Nb Ok-edge XANES spectra for Nb2O5 beneath excessive stress (0-16.9 GPa) have been generated, reproducing the reported spectra for Nb2O5 beneath ambient situations and excessive stress. These first HPXANES outcomes are reported on this paper. The scope of extending good knowledge high quality to the EXAFS vary sooner or later is addressed. This work ought to encourage and information future high-pressure XAFS experiments with comparable infrastructure.
A helium mini-cryostat for the nanoprobe beamline ID16B at ESRF: traits and efficiency
A helium mini-cryostat has been developed for the laborious X-ray nanoprobe ID16B of the European Synchrotron to gather X-ray excited optical luminescence and X-ray fluorescence at low temperature (<10 Ok). The mini-cryostat has been particularly designed to suit throughout the sturdy house restrictions and high-demanding mechanical constraints imposed by the beamline to supply vibration-free operation and maximal thermal stability.
This paper studies the detailed design, structure and technical necessities of the mini-cryostat, and presents the primary experimental knowledge measured utilizing the cryogenic gear. The ensuing cryo-system options final thermal stability, quick cool-down and ultra-low vibrations. The simultaneous X-ray fluorescence and X-ray excited optical luminescence knowledge acquired from bulk GaN and core/shell InGaN/GaN multi-quantum wells validated the wonderful efficiency of the cryostat with final decision, stability and sensitivity.
Improvement of a high-precision XYZ translator and estimation of beam profile of the vacuum ultraviolet and gentle X-ray undulator beamline BL-13B on the Photon Manufacturing facility
A high-precision XYZ translator was developed for the microanalysis of digital buildings and chemical compositions on materials surfaces by electron spectroscopy methods, akin to photoelectron spectroscopy and absorption spectroscopy, using the vacuum ultraviolet and gentle X-ray synchrotron radiation at an undulator beamline BL-13B on the Photon Manufacturing facility. Utilizing the high-precision translator, the profile and measurement of the undulator beam had been estimated.
They had been discovered to strongly depend upon the photon vitality however had been much less affected by the polarization route. To display the microscopic measurement functionality of an experimental equipment incorporating a high-precision XYZ translator, the homogeneities of an SnO movie and a naturally grown anatase TiO2 single crystal had been investigated utilizing X-ray absorption and photoemission spectroscopies. The upgraded system can be utilized for elemental analyses and digital construction research at a spatial decision within the order of the beam measurement.
A passive hutch-cooling system for attaining excessive thermal-stability operation on the Nanoprobe beamline, Diamond Mild Supply
The event of low-emittance storage rings and the fast developments in nano-optics and imaging methods are resulting in lowering X-ray spot sizes and growing necessities on the environmental and mechanical stability of beamline elements. Particularly, temperature stability within the experimental hutches is crucial to reduce uncontrolled displacements brought on by thermal enlargement and guarantee constant efficiency.
Right here, the design and thermal efficiency of the experimental hutches of the Nanoprobe beamline at Diamond Mild Supply are described, the place a typical deviation of the room temperature right down to 0.017°C over prolonged durations is demonstrated. The rooms are saved at fixed temperature utilizing water-cooled radiant panels which line the ceiling and partitions.
 on standard 18 mm pins,
Installed in 100 B1A-R bases,
Packaged and stored in 5 MiTeGen base holders) Medium Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroMounts (25 each of 75, 100, 150and 200 um aperture DT MicroMounts) on standard 18 mm pins,
Installed in 100 B1A-R bases,
Packaged and stored in 5 MiTeGen base holders |
|
BL100-B1A-R-A2 |
MiTeGen |
100 MOUNT/BASE ASSEMBLIES |
EUR 1497 |
|
Description: Medium Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroMounts (25 each of 75, 100, 150and 200 um aperture DT MicroMounts) on standard 18 mm pins,Installed in 100 B1A-R bases,Packaged and stored in 5 MiTeGen base holders |
 on standard 18 mm pins,
Installed in 100 B1A-R bases,
Packaged and stored in 5 MiTeGen base holders) Large Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroLoops (25 each of 300, 400, 500 and 600 um aperture DT MicroLoops) on standard 18 mm pins,
Installed in 100 B1A-R bases,
Packaged and stored in 5 MiTeGen base holders |
|
BL100-B1A-R-A3 |
MiTeGen |
100 MOUNT/BASE ASSEMBLIES |
EUR 1497 |
|
Description: Large Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroLoops (25 each of 300, 400, 500 and 600 um aperture DT MicroLoops) on standard 18 mm pins,Installed in 100 B1A-R bases,Packaged and stored in 5 MiTeGen base holders |
 on standard 18 mm pins,
Installed in 100 B3-R bases,
Packaged and stored in 5 MiTeGen base holders) Small Aperture Assortment Beamline Sample Preparation Kit;100 Dual Thickness MicroMounts (25 each of 10, 20, 30and 50 um aperture DT MicroMounts) on standard 18 mm pins,
Installed in 100 B3-R bases,
Packaged and stored in 5 MiTeGen base holders |
|
BL100-B3-R-A1 |
MiTeGen |
100 MOUNT/BASE ASSEMBLIES |
EUR 1497 |
|
Description: Small Aperture Assortment Beamline Sample Preparation Kit;100 Dual Thickness MicroMounts (25 each of 10, 20, 30and 50 um aperture DT MicroMounts) on standard 18 mm pins,Installed in 100 B3-R bases,Packaged and stored in 5 MiTeGen base holders |
 on standard 18 mm pins,
Installed in 100 B3-R bases,
Packaged and stored in 5 MiTeGen base holders) Medium Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroMounts (25 each of 75, 100, 150and 200 um aperture DT MicroMounts) on standard 18 mm pins,
Installed in 100 B3-R bases,
Packaged and stored in 5 MiTeGen base holders |
|
BL100-B3-R-A2 |
MiTeGen |
100 MOUNT/BASE ASSEMBLIES |
EUR 1497 |
|
Description: Medium Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroMounts (25 each of 75, 100, 150and 200 um aperture DT MicroMounts) on standard 18 mm pins,Installed in 100 B3-R bases,Packaged and stored in 5 MiTeGen base holders |
 on standard 18 mm pins,
Installed in 100 B3-R bases,
Packaged and stored in 5 MiTeGen base holders) Large Aperture Assortment Beamline Sample Preparation Kit;100 Dual Thickness MicroLoops (25 each of 300, 400, 500 and 600 um aperture DT MicroLoops) on standard 18 mm pins,
Installed in 100 B3-R bases,
Packaged and stored in 5 MiTeGen base holders |
|
BL100-B3-R-A3 |
MiTeGen |
100 MOUNT/BASE ASSEMBLIES |
EUR 1497 |
|
Description: Large Aperture Assortment Beamline Sample Preparation Kit;100 Dual Thickness MicroLoops (25 each of 300, 400, 500 and 600 um aperture DT MicroLoops) on standard 18 mm pins,Installed in 100 B3-R bases,Packaged and stored in 5 MiTeGen base holders |
 on standard 18 mm pins,
Installed in 100 B3S-R bases,
Packaged and stored in 5 MiTeGen base holders) Small Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroMounts (25 each of 10, 20, 30and 50 um aperture DT MicroMounts) on standard 18 mm pins,
Installed in 100 B3S-R bases,
Packaged and stored in 5 MiTeGen base holders |
|
BL100-B3S-R-A1 |
MiTeGen |
100 MOUNT/BASE ASSEMBLIES |
EUR 1497 |
|
Description: Small Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroMounts (25 each of 10, 20, 30and 50 um aperture DT MicroMounts) on standard 18 mm pins,Installed in 100 B3S-R bases,Packaged and stored in 5 MiTeGen base holders |
 on standard 18 mm pins,
Installed in 100 B3S-R bases,
Packaged and stored in 5 MiTeGen base holders) Medium Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroMounts (25 each of 75, 100, 150and 200 um aperture DT MicroMounts) on standard 18 mm pins,
Installed in 100 B3S-R bases,
Packaged and stored in 5 MiTeGen base holders |
|
BL100-B3S-R-A2 |
MiTeGen |
100 MOUNT/BASE ASSEMBLIES |
EUR 1497 |
|
Description: Medium Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroMounts (25 each of 75, 100, 150and 200 um aperture DT MicroMounts) on standard 18 mm pins,Installed in 100 B3S-R bases,Packaged and stored in 5 MiTeGen base holders |
 on standard 18 mm pins,
Installed in 100 B3S-R bases,
Packaged and stored in 5 MiTeGen base holders) Large Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroLoops (25 each of 300, 400, 500 and 600 um aperture DT MicroLoops) on standard 18 mm pins,
Installed in 100 B3S-R bases,
Packaged and stored in 5 MiTeGen base holders |
|
BL100-B3S-R-A3 |
MiTeGen |
100 MOUNT/BASE ASSEMBLIES |
EUR 1497 |
|
Description: Large Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroLoops (25 each of 300, 400, 500 and 600 um aperture DT MicroLoops) on standard 18 mm pins,Installed in 100 B3S-R bases,Packaged and stored in 5 MiTeGen base holders |
 on standard 18 mm pins,
Installed in 100 B5-R bases,
Packaged and stored in 5 MiTeGen base holders) Small Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroMounts (25 each of 10, 20, 30and 50 um aperture DT MicroMounts) on standard 18 mm pins,
Installed in 100 B5-R bases,
Packaged and stored in 5 MiTeGen base holders |
|
BL100-B5-R-A1 |
MiTeGen |
100 MOUNT/BASE ASSEMBLIES |
EUR 1497 |
|
Description: Small Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroMounts (25 each of 10, 20, 30and 50 um aperture DT MicroMounts) on standard 18 mm pins,Installed in 100 B5-R bases,Packaged and stored in 5 MiTeGen base holders |
 on standard 18 mm pins,
Installed in 100 B5-R bases,
Packaged and stored in 5 MiTeGen base holders) Medium Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroMounts (25 each of 75, 100, 150and 200 um aperture DT MicroMounts) on standard 18 mm pins,
Installed in 100 B5-R bases,
Packaged and stored in 5 MiTeGen base holders |
|
BL100-B5-R-A2 |
MiTeGen |
100 MOUNT/BASE ASSEMBLIES |
EUR 1497 |
|
Description: Medium Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroMounts (25 each of 75, 100, 150and 200 um aperture DT MicroMounts) on standard 18 mm pins,Installed in 100 B5-R bases,Packaged and stored in 5 MiTeGen base holders |
 on standard 18 mm pins,
Installed in 100 B5-R bases,
Packaged and stored in 5 MiTeGen base holders) Large Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroLoops (25 each of 300, 400, 500 and 600 um aperture DT MicroLoops) on standard 18 mm pins,
Installed in 100 B5-R bases,
Packaged and stored in 5 MiTeGen base holders |
|
BL100-B5-R-A3 |
MiTeGen |
100 MOUNT/BASE ASSEMBLIES |
EUR 1497 |
|
Description: Large Aperture Assortment Beamline Sample Preparation Kit; 100 Dual Thickness MicroLoops (25 each of 300, 400, 500 and 600 um aperture DT MicroLoops) on standard 18 mm pins,Installed in 100 B5-R bases,Packaged and stored in 5 MiTeGen base holders |
 Monoclonal antibody for Versican |
|
SMC-439D |
Stressmarq |
0.1mg |
EUR 423.6 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is not conjugated. |
Monoclonal antibody for Versican |
|
SMC-439D-A390 |
Stressmarq |
0.1mg |
EUR 480 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with ATTO 390. |
Monoclonal antibody for Versican |
|
SMC-439D-A488 |
Stressmarq |
0.1mg |
EUR 478.8 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with ATTO 488. |
Monoclonal antibody for Versican |
|
SMC-439D-A565 |
Stressmarq |
0.1mg |
EUR 478.8 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with ATTO 565. |
Monoclonal antibody for Versican |
|
SMC-439D-A594 |
Stressmarq |
0.1mg |
EUR 478.8 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with ATTO 594. |
Monoclonal antibody for Versican |
|
SMC-439D-A633 |
Stressmarq |
0.1mg |
EUR 478.8 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with ATTO 633. |
Monoclonal antibody for Versican |
|
SMC-439D-A655 |
Stressmarq |
0.1mg |
EUR 478.8 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with ATTO 655. |
Monoclonal antibody for Versican |
|
SMC-439D-A680 |
Stressmarq |
0.1mg |
EUR 478.8 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with ATTO 680. |
Monoclonal antibody for Versican |
|
SMC-439D-A700 |
Stressmarq |
0.1mg |
EUR 478.8 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with ATTO 700. |
Monoclonal antibody for Versican |
|
SMC-439D-ALP |
Stressmarq |
0.1mg |
EUR 471.6 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with Alkaline Phosphatase. |
Monoclonal antibody for Versican |
|
SMC-439D-APC |
Stressmarq |
0.1mg |
EUR 477.6 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with APC. |
Monoclonal antibody for Versican |
|
SMC-439D-APCCY7 |
Stressmarq |
0.1mg |
EUR 564 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with APC/Cy7. |
Monoclonal antibody for Versican |
|
SMC-439D-BI |
Stressmarq |
0.1mg |
EUR 474 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with Biotin. |
Monoclonal antibody for Versican |
|
SMC-439D-DY350 |
Stressmarq |
0.1mg |
EUR 495.6 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with Dylight 350. |
Monoclonal antibody for Versican |
|
SMC-439D-DY405 |
Stressmarq |
0.1mg |
EUR 482.4 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with Dylight 405. |
Monoclonal antibody for Versican |
|
SMC-439D-DY488 |
Stressmarq |
0.1mg |
EUR 470.4 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with Dylight 488. |
Monoclonal antibody for Versican |
|
SMC-439D-DY594 |
Stressmarq |
0.1mg |
EUR 472.8 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with Dylight 594. |
Monoclonal antibody for Versican |
|
SMC-439D-DY633 |
Stressmarq |
0.1mg |
EUR 466.8 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with Dylight 633. |
Monoclonal antibody for Versican |
|
SMC-439D-FITC |
Stressmarq |
0.1mg |
EUR 469.2 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with FITC. |
Monoclonal antibody for Versican |
|
SMC-439D-HRP |
Stressmarq |
0.1mg |
EUR 464.4 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with HRP. |
Monoclonal antibody for Versican |
|
SMC-439D-P594 |
Stressmarq |
0.1mg |
EUR 487.2 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Mouse Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with PE/ATTO 594. |
Monoclonal antibody for Versican |
|
SMC-439D-PCP |
Stressmarq |
0.1mg |
EUR 477.6 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Human Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with PerCP. |
Monoclonal antibody for Versican |
|
SMC-439D-RPE |
Stressmarq |
0.1mg |
EUR 475.2 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Human Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with RPE. |
Monoclonal antibody for Versican |
|
SMC-439D-STR |
Stressmarq |
0.1mg |
EUR 476.4 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Human Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is conjugated with Streptavidin. |
Monoclonal antibody for Versican |
|
SMC-439S |
Stressmarq |
0.012mg |
EUR 78 |
|
|
|
Description: A monoclonal antibody from clone S351-23 against Human Versican. The host species for the production of this antibody is Mouse. The antigen used for immunization is Mouse Fusion protein amino acids 362-585 (glycosaminoglycan alpha domain) of mouse Versican core protein. The antibody is tested and validated for WB, ICC/IF assays with the following recommended dilutions: WB (1:1000), ICC/IF (1:100). This MAb for Versican is not conjugated. |
) ELISA kit for Human VS (Versican) |
|
ELK2206 |
ELK Biotech |
1 plate of 96 wells |
EUR 518.4 |
|
|
|
Description: A sandwich ELISA kit for detection of Versican from Human in samples from blood, serum, plasma, cell culture fluid and other biological fluids. |
) ELISA kit for Mouse VS (Versican) |
|
ELK3294 |
ELK Biotech |
1 plate of 96 wells |
EUR 518.4 |
|
|
|
Description: A sandwich ELISA kit for detection of Versican from Mouse in samples from blood, serum, plasma, cell culture fluid and other biological fluids. |
 CS Analyzer version4 for Window OS |
|
2110030 |
Atto |
1unit |
EUR 2312.4 |
) CLIA kit for Human VS (Versican/PG-M) |
|
E-CL-H0801 |
Elabscience Biotech |
1 plate of 96 wells |
EUR 700.8 |
|
|
|
Description: A sandwich CLIA kit for quantitative measurement of Human VS (Versican/PG-M) in samples from Serum, Plasma, Cell supernatant |
) ELISA kit for Human VCAN (Versican/PG-M) |
|
E-EL-H1233 |
Elabscience Biotech |
1 plate of 96 wells |
EUR 640.8 |
|
|
|
Description: A sandwich ELISA kit for quantitative measurement of Human VCAN (Versican/PG-M) in samples from Serum, Plasma, Cell supernatant |
 ELISA kit for Human Versican core protein |
|
EK3991 |
SAB |
96 tests |
EUR 663.6 |
|
Description: Enzyme-linked immunosorbent assay kit for quantification of Human Versican core protein in samples from serum, plasma, tissue homogenates and other biological fluids. |
) ELISA kit for Human Versican/PG-M/PG-350 (VS) |
|
KTE60067-48T |
Abbkine |
48T |
EUR 398.4 |
|
|
|
Description: Quantitative sandwich ELISA for measuring Human Versican/PG-M/PG-350 (VS) in samples from cell culture supernatants, serum, whole blood, plasma and other biological fluids. |
ELISA kit for Human Versican/PG-M/PG-350 (VS) |
|
KTE60067-5platesof96wells |
Abbkine |
5 plates of 96 wells |
EUR 2538 |
|
|
|
Description: Quantitative sandwich ELISA for measuring Human Versican/PG-M/PG-350 (VS) in samples from cell culture supernatants, serum, whole blood, plasma and other biological fluids. |
ELISA kit for Human Versican/PG-M/PG-350 (VS) |
|
KTE60067-96T |
Abbkine |
96T |
EUR 646.8 |
|
|
|
Description: Quantitative sandwich ELISA for measuring Human Versican/PG-M/PG-350 (VS) in samples from cell culture supernatants, serum, whole blood, plasma and other biological fluids. |
, 190-1100nm, analysis software and automatic 6-cell holder included) AgileSpec? UV-Visible Spectrophotometer, Split Beam (internal double beam), 190-1100nm, analysis software and automatic 6-cell holder included |
|
ASP-1100 |
ACTGene |
each |
EUR 8456.4 |
 RapidSeq High Yield Small RNA Sample Prep Kit, Trial version enough for 2 rxn. Customer select aligners |
|
KS074012-T |
Biochain |
1 Kit |
EUR 228 |
 RapidSeq High Yield Directional mRNA Sample Prep Kit, Trial version enough for 2 rxn. Customer select aligners |
|
KS073012-T |
Biochain |
1 Kit |
EUR 228 |
 Calibration Beads for MoFlo |
|
B28479 |
Spherotech |
each |
EUR 346.8 |
|
Description: Please reffer to the technical data sheet for more detail information for this item. Our dedicated team would be happy to assist you via live chat, email or phone. |
 Calibration Beads for MoFlo Astrios |
|
B27034 |
Spherotech |
each |
EUR 346.8 |
|
Description: Please reffer to the technical data sheet for more detail information for this item. Our dedicated team would be happy to assist you via live chat, email or phone. |
Radiant panels are comparatively frequent in high-end electron microscopy rooms, however that is the primary demonstration of their use for effective temperature management in an X-ray hutch and will present a helpful foundation for future upgrades at upcoming low-emittance sources.
Leave a Comment